#FaceMaskwithFrame part 2:
I prefer over-the-ear style face masks, so instead of using grommets and a long piece of elastic like Jen did (see previous post for link to her version), I used Kam snaps. I did use a little contact cement to glue the foam side flaps down before attaching the snaps.
I attached the snaps to the fabric cover before I stitched the elastic casings on the sides. I also saved time by making loops of elastic and putting them on before sewing that last stitchline on each side - that way I don't have to thread elastic through the casings after. If they're too loose in the end, I can just tie another knot.
I spent the day priming things for paint and then I remembered to shoot a quick video. #SewingStudioBuild
I started cutting all the edges while Janet was away yesterday morning. When she got back after lunch, she pulled out a roller and started filling in. I'll put a pic below in the comments. #SewingStudioBuild
We broke for lunch and then came back with a portal ac unit plugged in to an extention cord from the house. Can't wait until they finished hooking up all the electrical and we have the mini split cooling the room for us - it was stupid humid today! #SewingStudioBuild
Why do you have to be so pretty, brocade? I love you, but you are so fussy to work with!
#derbydress
I made a rub-off dress... the only change I made was to increase the width of the waistband from 2" to 3", which I am more-or-less satisfied with. I'd do a few things, construction-wise, differently next time, but this is an easy, comfortable dress.
The original is from Talbots.
It’s been awhile since I’ve had something to show, but I’m finally getting the pictures up! Both of these were from the Paloma pattern in the Itch to Stitch “Sew Beautiful” book. I did the top first to test the pattern, and tried to add some length to the sleeves, since 3/4 length only works here about 3 to 4 days of the year! I apparently underestimated the length I needed to add, but I had to cut crosswise even to add this much, so I couldn’t have done more.
For the dress, I did add more sleeve length (slightly overestimated this time). I also added ties to the neck and pockets, though in retrospect, I probably should have put them in higher. Based on the shirt, I’d thought putting them in the top part would be too high. So I inserted them in the first ruffle layer and it is maybe a bit too low.
Overall, though, I think this was a worthwhile pattern to play with.
